Aftermarket Levers

bigklar

New Member
Riding for 47 Years
Local time
Today, 14:02
Joined
Aug 13, 2021
Messages
6
Points
0
Age
64
Location
northumberland
First Name
steve rourke
My Ride
triumph speed twin
hello all just installed a set of aftermarket levers on my 2021 speed twin they are EVOTECH must say they are a work of art
well worth the money here in the uk the only problem i am having is on the brake lever its getting the plunger in the Brembo master cylinder it does not go into the rubber seal fully as the plunger is larger than the small hole in the seal i have tryed to lightly grease the plunger .the brake works fine but when you look at the rubber seal it is not seated fully any advice would be great
many thanks
 

shanered6

Time for adventure
Riding for 45 Years
Staff
Local time
Today, 14:02
Joined
Apr 5, 2011
Messages
6,667
Points
563
Age
53
Location
Turriff, Aberdeenshire
First Name
shane llywarch
My Ride
Moto Guzzi Stelvio 1200 ntx
Have you tried taking the rubber dust seal off and fitting to the lever first , and then refit the lever then seal after .
 

bigklar

New Member
Riding for 47 Years
Local time
Today, 14:02
Joined
Aug 13, 2021
Messages
6
Points
0
Age
64
Location
northumberland
First Name
steve rourke
My Ride
triumph speed twin
Have you tried taking the rubber dust seal off and fitting to the lever first , and then refit the lever then seal after .
no not yet afraid to just incase the seal does not go back into the master cylinder
 

shanered6

Time for adventure
Riding for 45 Years
Staff
Local time
Today, 14:02
Joined
Apr 5, 2011
Messages
6,667
Points
563
Age
53
Location
Turriff, Aberdeenshire
First Name
shane llywarch
My Ride
Moto Guzzi Stelvio 1200 ntx
you could use a file and just taper the end of the pin a bit ?
 

bigklar

New Member
Riding for 47 Years
Local time
Today, 14:02
Joined
Aug 13, 2021
Messages
6
Points
0
Age
64
Location
northumberland
First Name
steve rourke
My Ride
triumph speed twin
you could use a file and just taper the end of the pin a bit ?
my try this at the last resort i have changed countless aftermarket levers never has this problem before
 
Premium

Support TriumphTalk by becoming a Premium Member.

 What You Get

Donate

 

 

Search

Top Bottom