ISO: Matte Black Side Covers For 2018 T120 Black

[onlyoneman]

Hey all - I'm hoping to locate some matte black T120 side covers for my 2018 T120 black build. You can see the side covers on this stock bike here: Matte Black Side Covers.

I'm willing to purchase a pair of matte colors, or swap with someone for my current glossy black side covers. Please let me know if anyone knows of any resources where I might purchase these, or has any you'd be willing to part with.

Thanks!

 

[atomsplitter]

You are looking for T2309941-PS and T2309942-PS

The gloss version is PG.

You should be able to order those from a dealer, or find a used set on eBay.

 

[onlyoneman]

You are looking for T2309941-PS and T2309942-PS

The gloss version is PG.

You should be able to order those from a dealer, or find a used set on eBay.

Thanks! Looks like those parts include brackets and fixtures and such, which I suspect is a big part of the reason why the cost is so high. I'm hoping to find just the plastic outside cover with the sticker on it to swap for the matte version, and hoping that as a result the cost will be much less than the nearly $300(!!!) per side. That's pretty excessive for a basic plastic cover.

 

[atomsplitter]

You can also look for salvage parts, however it's usually easier to ask the salvage yard if they have your bike model in stock than the actual part. Expect to pay about 90% of new price for a badly damaged barely useable part from any salvage yard (my personal experience, I could (and did) write a chapter on the subject).

 

[onlyoneman]

You can also look for salvage parts, however it's usually easier to ask the salvage yard if they have your bike model in stock than the actual part. Expect to pay about 90% of new price for a badly damaged barely useable part from any salvage yard (my personal experience, I could (and did) write a chapter on the subject).

Oof. Sounds like there's some stories there!

I'm likely to just wrap or paint my existing covers if it comes to it, but wanted to see if I could surface any original parts before I go that route.

Appreciate your responses!

 

[atomsplitter]

Advice is free, my experiences usually cost me $. If you go look at my Project Swingarm thread you'll get what I mean.....