Stock Exhaust Mount Photos Needed

Trogon

New Member
Local time
Today, 07:59
Joined
Aug 14, 2016
Messages
7
Points
2
Age
58
Location
USA
First Name
Cliff
My Ride
1976 Triumph Tiger. 2019 Triumph Scrambler 1200XE
Riding Since
1980
Hi guys, can anyone help me with a few photos of the mounting for the exhaust side cover on the 1200XE. The previous owner had the TEC exhaust installed, which sounds awesome but on long trips I find it too loud, so I am putting back the original OEM exhaust silencer. I have installed the OEM but I don't have the mounting bracket for the side cover (part 27 see photos attached) as the PO lost it. I can order a new one but its a little confusing what other screws and spacers I will need to order as well. Maybe parts 16, 20 & 28 but not sure. I was hoping that if someone has some close-up photos from under the side cover I might get a better idea of what I need to order. Maybe someone has take pictures during dissasembly while installing another silencer.

I have attached a photo of my mounted OEM silencer plus the exploded view from the parts manual.

Any help is much appreciated. Thanks guys.
 

Attachments

  • Parts.png
    Parts.png
    500.6 KB · Views: 1
  • Exhaust 1200XE.png
    Exhaust 1200XE.png
    928.7 KB · Views: 1
Hi guys, can anyone help me with a few photos of the mounting for the exhaust side cover on the 1200XE. The previous owner had the TEC exhaust installed, which sounds awesome but on long trips I find it too loud, so I am putting back the original OEM exhaust silencer. I have installed the OEM but I don't have the mounting bracket for the side cover (part 27 see photos attached) as the PO lost it. I can order a new one but its a little confusing what other screws and spacers I will need to order as well. Maybe parts 16, 20 & 28 but not sure. I was hoping that if someone has some close-up photos from under the side cover I might get a better idea of what I need to order. Maybe someone has take pictures during dissasembly while installing another silencer.

I have attached a photo of my mounted OEM silencer plus the exploded view from the parts manual.

Any help is much appreciated. Thanks guys.
I forgot to mention its a 2019 model that has the CAT in the headers. The newer models with the CAT in the Silencer have a different mounting setup using three standoff grommets.
 
Hi I installed a TEC exhaust on my 2019 and the best thing to do would be good to their site and watch the video and it will show disassembly of the stock to put the short TEC on. That should help
 
Hi I installed a TEC exhaust on my 2019 and the best thing to do would be good to their site and watch the video and it will show disassembly of the stock to put the short TEC on. That should help
Thanks for the suggestion. I took a look at their video again and grabbed the attached picture. Its helpful thanks.
 

Attachments

  • TEC Dissasembly.png
    TEC Dissasembly.png
    285.5 KB · Views: 2
Premium

Support TriumphTalk by becoming a Premium Member.

 What You Get

Donate

 

 

Search

Back
Top Bottom