- Local time
- Today, 18:25
- Joined
- Sep 23, 2020
- Messages
- 74
- Points
- 17
- Age
- 62
- Location
- Townsville
- First Name
- Phil
- My Ride
- 2015 Triumph Bonneville America.
Hi all, I have just finished removing the O2 sensors on my 2015 America. It was much easier than I expected as I did not have to remove the fuel tank. The bike starts easily without the use of the “choke” and there are no engine warning lights so all seems to be well. I have previously removed the Air Injection System. I haven’t been for a ride yet as we are in the middle of a monsoonal wet season. The weather bureau is forecasting some dry weather around Thursday so fingers crossed.
My question is while removing the O2 sensors I came across this plug with the pictured wires inserted, I have no electrical knowledge so have no idea what this is, or what the purpose of the modification is. The plug is located underneath the tank on the right hand side. Any help would be greatly appreciated.

My question is while removing the O2 sensors I came across this plug with the pictured wires inserted, I have no electrical knowledge so have no idea what this is, or what the purpose of the modification is. The plug is located underneath the tank on the right hand side. Any help would be greatly appreciated.

